8/7/2023 0 Comments Heating elementInformation on manufacturer recommended heating mediums can be found here. Inappropriate heating mediums may cause residual build-up on the heating element, reducing its power output and leading to the damage of the device. Since the heater projects outside the radiator frame it should be located in such a way as to reduce the risk of mechanical damage to the casing of the heating element controller (the controller casing should never be stood on or used for hanging objects). The heater should always be installed in the bottom part of the radiator. The most important is radiator construction and positioning of the heating element. The level of temperature and temperature distribution in the radiator depends on a number of factors. The heating element must be fully immersed during its operation! For testing purposes it is safe to turn on a “cold” heating element for a maximum of 5 seconds. The heating element should be checked when fully immersed in a heating medium. Installation and use of the heating element positioned upside down will render the device ineffective and unsafe, therefore it is not permitted under warranty.Īvoid turning on the heating element when it is not fully immersed in the heating medium, as this is a damage risk. The use of incorrect tools or twisting the head of the heating element will cause mechanical damage to the device. Installation of the heating element should be done with the use of a 22 or 24 spanner (see manual). The absence of an air cushion will lead to a pressure increase inside the radiator which is a serious safety hazard and may damage the heating element.Īlways use a spanner when installing a heating element. This is necessary due to liquid expansion at high temperatures. ![]() When filling an electric radiator (those not intended for central heating installation), please remember to leave an appropriate free space inside the radiator (an air cushion). For detailed instructions, please see the electric radiator manual’s “air cushion” section.įilling the radiator with a heating medium that is too hot will cause damage to the thermal fuse installed in the heating element.ĭon’t overfill the radiator - leave an air cushion. To avoid excessive pressure build-up inside the radiator (which will damage the heating element), please leave one of the radiator valves open. Rising temperature increases a liquid’s volume. Turning on the device installed in a “dry” radiator will damage the heating element.Įnsure that at least one of the radiator valves is open before you turn on the heating element. ![]() Installation of the heating element in high temperature systems will damage the fuse even when the device is not connected to electricity.Įnsure that the radiator is filled with a heating medium before switching the heating element on. ![]() Heating element is not suitable for central heating systems where water temperature may exceed 82☌.Ī thermal fuse installed in a heating element prevents its operation in dry conditions.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |